Compliance & Policy

EPA sends revised heavy-duty NOx rule to OMB, 35 mg cap kept

EPA sent final MY2027 heavy-duty NOx revisions to OMB on Nov. 19, retaining 35 mg/hp-hr while delaying 650,000-mile durability to 2030 and restoring 100,000-mile or five-year warranties.

EPA Sends Final Revision of Heavy-Duty Engine NOx Emissions Standards to OMB for Review
EPA Sends Final Revision of Heavy-Duty Engine NOx Emissions Standards to OMB for ReviewTama66 / pixabay

Waypoints

  1. EPA sent the final MY2027 revisions to OMB on November 19, 2026 for review.

  2. The tailpipe ceiling remains 35 mg/hp-hr, an 80% cut from 200 mg/hp-hr.

  3. The 650,000-mile durability step moves to MY2030; 435,000 miles applies through MY2029.

  4. Emissions warranty returns to 100,000 miles or five years from 450,000 miles or 10 years.

  5. Nonconformance penalties cover medium- and heavy-heavy-duty engines for MY2027-2029.

By Rebecca Stone

EPA transmitted final revisions to the Model Year 2027 heavy-duty highway engine nitrogen oxide rule to the White House Office of Management and Budget on November 19, 2026, retaining a 35 milligram-per-brake-horsepower-hour tailpipe limit. The submission starts interagency review; it does not yet make the package effective.

What changes in the final package?

The package, titled “Amendments to the Model Year 2027 and Later Heavy-Duty Highway Engine Criteria Pollutant Program,” carries Regulation Identifier 2060-AW83 and enters final interagency review under Executive Order 12866. OIRA records, as reported by Transport Topics, place it among the last administrative hurdles before Federal Register publication; the earlier proposal used Docket ID EPA-HQ-OAR-2026-0728.

The revision leaves the central numeric target unchanged: an 80 percent reduction from the long-standing 200 mg/hp-hr baseline to 35 mg/hp-hr for Model Year 2027 engines. EPA estimates that the revised structure preserves roughly 90 percent of the original environmental benefits and delivers a 42 percent cumulative reduction in heavy-duty fleet NOx output by 2055 against pre-2023 baselines.

  • NOx ceiling: The revised rule retains 35 mg/hp-hr for Model Year 2027 and later engines across FTP and RMC transient cycles and duty cycles.
  • Durability: The 2023 framework scheduled the 650,000-mile step for Model Year 2027 and an eventual 800,000 miles in 2031. The revision delays the first higher step to Model Year 2030 and keeps 435,000 miles through Model Year 2029.
  • Warranty: Emissions coverage returns to the statutory benchmark of 100,000 miles or five years, replacing the 2023 requirement for 450,000 miles or 10 years.
  • Nonconformance penalties: The rule establishes Section 206(g) penalties for medium- and heavy-heavy-duty engines in Model Years 2027 through 2029. Manufacturers facing certification delays can pay a per-unit fee for a Certificate of Conformity; the earlier rule did not authorize those penalties.
  • Aftertreatment and credits: Selective Catalytic Reduction inducements will use visible and audible dashboard warnings rather than vehicle-speed derates and engine torque cuts. The rule also expands credit lifetimes and cross-class trading flexibilities.

Why did EPA revise the 2023 rule?

The 2023 standards drew concerns over component durability and vehicle cost inflation, which industry sources estimated at $25,000 to $30,000 per Class 8 tractor. EPA designed the rule to reduce smog-forming emissions.

Fleets warned that the premiums would trigger an artificial pre-buy wave in 2026 and a sharp freight procurement drop in 2027. The revision curtails projected equipment cost surges.

EPA Administrator Lee Zeldin announced a formal review in March 2025 to provide compliance flexibility while retaining public-health goals. EPA issued the Notice of Proposed Rulemaking on July 14, 2026. Comments closed August 29, leading directly to the final text now under OMB review.

How did industry and clean air groups respond?

American Trucking Associations President and CEO Chris Spear said: “Nonconformance penalties and adjusted warranties provide necessary runway for manufacturers to validate advanced aftertreatment systems under commercial duty cycles without disrupting interstate freight logistics.”

Cummins Inc. Chairman and CEO Jennifer Rumsey said on the November 5, 2026 earnings call that engine makers anticipate nonconformance penalties. She added: “Transparent penalty rates and credit mechanisms are vital for production planning.”

Clean air advocates said retaining the 35 mg/hp-hr ceiling remains critical in nonattainment regions. They described commercial transport as a primary NOx source that drives ozone and particulate formation.

What must laboratories and modeling groups change?

  • University engine laboratories operating dynamometers under 40 CFR Part 1065 must update Model Year 2027 test protocols. They can retain 435,000-mile deterioration-factor aging cycles through Model Year 2029. Laboratories holding state certification, such as ELAP certification, should recalibrate chemiluminescence analyzers, particulate samplers and transient test cycles to the revised federal procedures.
  • Atmospheric chemistry groups running Community Multiscale Air Quality and Comprehensive Air Quality Model with Extensions models must update mobile-source inventories. EPA will update Motor Vehicle Emission Simulator factors for revised deterioration curves and penalty adoption rates, so research offices should prepare new baselines for ozone-nonattainment studies and comparisons along high-density freight corridors.
  • Contract emissions testers must maintain data integrity. Dynamometer runs generate continuous telemetry on exhaust temperatures and catalyst conversion rates. Facilities should log each run in a validated scientific data management system to create tamper-evident records, separate operational bench management from data governance, and keep federally funded results auditable and reproducible.

What milestone comes next?

The Office of Information and Regulatory Affairs is expected to use an expedited review schedule because the rule carries an upcoming January 1, 2027 effective date. Under the Administrative Procedure Act, major regulations typically require 30 days between Federal Register publication and effectiveness, although exemptions can apply when an action relieves restrictions.

After OMB clearance and Federal Register publication, engine manufacturers will finalize certification documentation for Model Year 2027 production. University laboratories and emissions modelers will update testing and inventory workflows through Model Year 2030.

OMB clearance and Federal Register publication remain the decisive milestones before the January 1, 2027 effective date and final MY2027 certification.

via casrai.org (Source)

Share this article:

More from Rebecca Stone

Rebecca Stone

Show full bio

News editor covering companies, deals and strategy in Circular economy and the environmental industry at Circular Wire.

545 articles

Nearby routes

« Previous article