Plastics & Chemical Recycling
Nitrogen, Not Chlorine, Is the Real Threat in Plastic Pyrolysis Oil
KRICT and KOREATECH tests on 13 impurities in waste plastic pyrolysis oil show specific nitrogen compounds, not chlorine or sulfur, drive catalytic cracking losses.

Waypoints
KRICT and KOREATECH tested 13 impurity compounds in waste plastic pyrolysis oil and published results in ACS Catalysis, April 2026 issue.
2-methylpyridine sharply degraded zeolite cracking performance while benzonitrile had little effect; sulfur, chlorine and oxygen compounds were minor factors.
Catalysts regenerated after coke removal recovered initial performance, supporting continuous circulating fluidized-bed operation.
The work builds on the team's 2024 fluidized-bed cracking technology that needs no hydroprocessing step.
Thirteen impurity compounds, tested one by one in real waste plastic pyrolysis oil, have produced a clear verdict: nitrogen in certain chemical forms can sharply degrade catalytic cracking performance, while sulfur, chlorine and oxygen compounds matter far less. A Korean research team led by Dr. Do Kyoung Kim at the Korea Research Institute of Chemical Technology (KRICT), working with Professor Tae Yong Kim's group at Korea University of Technology and Education (KOREATECH), published the findings as a cover article in the April 2026 issue of ACS Catalysis, a journal with an Impact Factor of 13.1.
Why does impurity chemistry decide feedstock value?
Waste plastic pyrolysis oil is produced by thermally decomposing discarded plastics at high temperatures. It can substitute for petroleum or naphtha as a petrochemical feedstock: catalytic cracking of its hydrocarbons yields light olefins, the base materials for plastics and chemical products. The catch is impurity load. Additives and mixed plastic inputs leave nitrogen-, sulfur-, chlorine- and oxygen-containing contaminants in the oil, and their types and concentrations vary with every feedstock.
In 2024 the same team reported a circulating fluidized-bed catalytic cracking technology that converts pyrolysis oil into light olefins without additional hydroprocessing. That study, however, ran on a single pyrolysis oil. It could not predict how the catalyst would behave with feedstocks carrying different impurity profiles. The follow-up study closed that gap.
What did the experiments show?
The researchers doped actual waste plastic pyrolysis oil with 13 nitrogen-, sulfur-, chlorine- and oxygen-containing impurities individually, then tracked changes in light-olefin yields and product distributions using the zeolite catalyst developed in 2024.
- Sulfur-, chlorine- and oxygen-containing compounds had relatively minor effects.
- Certain nitrogen-containing compounds significantly reduced catalytic performance.
- 2-methylpyridine had a pronounced effect; benzonitrile had a relatively small one.
That last comparison carries the commercial weight. Total nitrogen content alone does not predict performance loss; the specific chemical form of the nitrogen compound does. A feedstock specification built on a single nitrogen number would misprice the risk.
How did AI explain the mechanism?
To explain the pattern, the team applied a machine-learning potential (MLP), an AI-based computational chemistry technique, to compare how strongly nitrogen compounds and pyrolysis-oil hydrocarbons adsorb onto active sites inside the zeolite catalyst.
Zeolite catalysts crack hydrocarbons at active sites. When certain nitrogen-containing impurities occupy those sites first, fewer sites remain for the cracking reactions, and yields fall. The researchers also confirmed that molecular size and the spatial environment inside the catalyst influence the degree of degradation. In short, the poison has to fit the pore.
Can the process recover?
Three operational findings support industrial viability. Higher concentrations of nitrogen impurities caused greater degradation. Raising the reaction temperature mitigated their effects. And catalysts that lost activity after repeated use recovered their initial performance following regeneration to remove coke deposits, confirming the feasibility of circulating fluidized-bed operation with continuous catalyst regeneration.
The study establishes a basis for evaluating pyrolysis oil as a feedstock by impurity type, not just total impurity content. The findings are expected to support feedstock-specific impurity management, optimization of pretreatment processes and operating conditions, and wider industrial application of chemical recycling.
KRICT President Seokmin Shin said: "We expect these findings to be used to assess the potential for catalytic performance degradation by analyzing impurity compositions before introducing feedstocks into the process, and to develop impurity management and operating strategies tailored to feedstock characteristics."
Dr. Xuan Tin Tran, a postdoctoral researcher at KRICT, and Professor Tae Yong Kim of KOREATECH served as co-first authors. Dr. Do Kyoung Kim of KRICT, also a professor at the University of Science and Technology (UST), was corresponding author. Funding came from KRICT's institutional research program, the NRF-backed Development of Eco-friendly Chemicals as Alternative Raw Materials to Oil Program (2022M3J5A1051721), a KAIA project of the Ministry of Land, Infrastructure and Transport (RS-2022-00143402), and KOREATECH's 2024 Education and Research Promotion Program.
The milestone to watch is whether pyrolysis oil suppliers begin reporting impurity speciation, not just nitrogen totals, in their certificates of analysis. That is the paperwork that turns a cover article into a feedstock contract.
via azocleantech.com (Source)
More from Olivia Hart
Show full bio
Staff writer covering regulation, policy and their impact on Circular economy and the environmental industry at Circular Wire.
531 articles