Compliance & Policy
California SB 969 Cuts Duplicate EV Charger Testing, Sets 2028 Rule Deadline
Atlas Public Policy reports weights-and-measures rules added six cents per kWh at one California site; SB 969 ends duplicate field testing, with new rules due July 1, 2028.

Waypoints
Compliance costs added more than six cents per kWh at one California charging installation (Atlas Public Policy).
SB 969 eliminates duplicative initial field testing for chargers with approved factory certification.
California must update weights-and-measures regulations by July 1, 2028.
Atlas research drew on input from 19 organizations across regulators, providers, and advocates.
American Lung Association estimates $1.2 trillion in health benefits and up to 110,000 premature deaths prevented through 2050.
Compliance costs at one California charging installation added more than six cents per kilowatt-hour to the price of charging, according to new research from Atlas Public Policy that examines how state weights-and-measures regulation affects EV charging deployment across the United States.
The finding anchors a growing trade concern: consumer-protection rules written for gasoline pumps and mechanical scales are raising costs and causing service outages when applied to networked electronic chargers. Governor Gavin Newsom has now signed Senate Bill 969, authored by Senator Eloise Gómez Reyes, which eliminates duplicative initial field testing for qualifying chargers and mandates a proportional enforcement process. The California Department of Food and Agriculture, in consultation with the California Energy Commission, must update the relevant regulations by July 1, 2028.
What does the research actually say?
Atlas Public Policy drew on input from 19 organizations representing regulators, charging providers, equipment owners, service agencies, and consumer advocates. The study identifies recurring problems: costly and sometimes duplicative inspection requirements, limited testing capacity, inconsistent enforcement across jurisdictions, and insufficient coordination among government agencies.
The central finding cuts against expectations. The primary challenge is not whether EV chargers can meet rigorous accuracy standards, the research concludes, but whether the regulatory processes used to verify compliance are designed for the technology and the scale of deployment. When a correctable compliance issue — a labeling deficiency, for instance — takes an otherwise functional charger offline, drivers lose access, businesses lose revenue, and network reliability suffers.
The six-cent figure comes from a single installation, not an industry-wide average. Atlas presents it as an illustration of how fixed compliance costs land hardest on lower-utilization sites. Those costs can be passed to drivers, compounding affordability pressures already tied to charging access and charging time. Consumer research cited in the analysis ranks lack of access to reliable charging as the biggest barrier to EV adoption, with charging time second.
Lower-utilization sites matter disproportionately. Chargers at multifamily housing, workplaces, and similar locations initially serve relatively few vehicles, but they make EV ownership practical for households without convenient home charging, particularly in communities already facing adoption barriers.
What does SB 969 change?
The California legislation, signed by Newsom and authored by Reyes, makes four structural changes to the state's weights-and-measures regime for chargers:
- It eliminates duplicative initial field testing for qualifying chargers that have already completed approved factory testing and certification, allowing compliant equipment to enter service without additional field accuracy testing.
- It authorizes risk-based statistical sampling as an alternative to recurring inspection requirements, giving counties flexibility while preserving their authority to inspect chargers in response to consumer complaints.
- It establishes proportional enforcement: chargers must be removed from service for accuracy or type-approval failures, but other deficiencies generally trigger notice and an opportunity to correct before shutdown.
- It improves coordination and information sharing between California's weights-and-measures authorities and the California Energy Commission.
California is the nation's largest EV market, which gives its approach outsized weight as other states develop or implement their own charger metering requirements.
What reforms does Atlas recommend?
The research proposes a three-part playbook for states that stops short of weakening standards:
- Modernize testing and inspection. Recognize approved factory testing and certification instead of duplicative field testing at installation; adopt longer testing intervals or risk-based statistical sampling to direct limited inspection resources toward equipment where problems are most likely.
- Calibrate enforcement to the violation. Keep meaningful penalties, including removal from service, for accuracy failures, but reserve automatic shutdowns for consumer risk rather than correctable administrative or labeling deficiencies.
- Evaluate costs and coordinate agencies. Assess whether inspection fees disproportionately burden lower-utilization sites, and align weights-and-measures officials with state energy offices and transportation departments — especially when one agency funds chargers that another agency determines can legally operate.
Atlas also calls for clear compliance timelines, transition provisions for existing equipment, and differentiated approaches for lower-risk charging applications.
The stakes extend past the charging industry. An American Lung Association analysis estimated that a nationwide shift to zero-emission transportation, paired with cleaner electricity generation, could deliver more than $1.2 trillion in public health benefits and prevent up to 110,000 premature deaths through 2050. Regulatory friction that slows charger deployment slows that transition.
The decisive milestone is procedural: California's Department of Food and Agriculture must complete its regulatory rewrite by July 1, 2028, with coordination among state agencies, county officials, consumer advocates, and charging stakeholders determining whether the reforms translate into deployment on the ground. Other states now have a template, and a deadline to watch, before their own requirements become entrenched.
via nrdc.org (Source)
More from Rebecca Stone
Show full bio
News editor covering companies, deals and strategy in Circular economy and the environmental industry at Circular Wire.
540 articles