E-Scrap & Battery Recycling
Smelters spend billions on e-scrap capacity, but intake stays flat
Eleven metals giants are adding e-scrap refining capacity across three continents, but reported intake is flat and refining charges unchanged as concentrate treatment fees hit zero.

Waypoints
62 million metric tons of e-waste generated globally in 2022; only 22.3% documented as collected and recycled, per the UN Global E-waste Monitor
2026 copper concentrate benchmark treatment charge fell to zero from $21.25 per metric ton in 2025; Boliden reported spot charges at minus $297
Aurubis' Richmond, Georgia smelter is designed for 180,000 metric tons annually; phases now complete in fiscal 2026/27 and 2027/28
Umicore committed €450 million ($494.9 million) to Hoboken precious-metals refining, commissioning planned for 2030
Korea Zinc projects its US PedalPoint/Kataman network will supply 14,000 metric tons of its 2026 copper output
Global e-scrap generation reached 62 million metric tons in 2022, yet only 22.3% was documented as formally collected and recycled — and the wave of smelter investment now underway across three continents has so far not produced either a scramble for material or better prices for suppliers.
That is the central finding of an analysis of 11 major smelters, refiners and materials companies conducted by Compliance Standards LLC, set out in a forthcoming report, "Global E-Scrap Refining: Capacity Expansion, Recovery Economics and the 2027 Outlook."
The report finds processing capacity expanding, but publicly reported intake volumes remain mostly flat or modestly higher. Available information offers little indication that suppliers are receiving better commercial terms.
The scale of the opportunity explains the investment. The UN's Global E-waste Monitor projects global generation will reach 82 million metric tons by 2030. Europe recorded a 42.8% documented collection and recycling rate, against substantially lower rates in several other regions.
Where is new capacity being built?
Four projects anchor the expansion.
- Aurubis is ramping up its Richmond, Georgia, secondary smelter, designed for about 180,000 metric tons annually of complex recycling materials, including e-scrap. The project has slipped; its two phases are now set to wrap up in fiscal 2026/27 and 2027/28.
- Atlantic Copper inaugurated its CirCular facility in Spain in September 2026, designed for about 60,000 metric tons annually of preprocessed nonferrous material from discarded electrical and electronic equipment. It will recover copper, gold, silver, palladium, platinum, tin and nickel.
- Umicore has committed €450 million ($494.9 million) to expand precious-metals refining at its Hoboken complex in Belgium, improving feedstock flexibility and recovery of tin, antimony and cobalt. Commissioning is planned for 2030.
- Mitsubishi Materials is expanding e-scrap processing capacity at its Naoshima smelter in Japan by about 30%, with reduced processing during the first quarter of 2027.
Neither Aurubis nor Atlantic Copper had immediately disclosed actual e-scrap processing volumes. Planned capacity and material processed remain two different measures.
Why are smelters chasing secondary feed?
Concentrate economics supply the pressure. The 2026 annual benchmark treatment charge for copper concentrates — the fee mines pay smelters per metric ton — fell to zero, from $21.25 per metric ton in 2025. Boliden reported spot treatment charges reaching minus $297 per metric ton at the end of September.
That collapse makes alternative feedstocks, including e-scrap, strategically important. The evidence does not establish that smelters are paying more to obtain them.
- Boliden reported 18,257 metric tons of electronics and alloys feed at its Rönnskär smelter in the third quarter, down 1.8% year over year.
- Aurubis reported intake of other recycling materials, a category that includes electronic scrap, down 3% over the first nine months of its fiscal year. The company held refining charges constant.
- DOWA Holdings provided a different signal, reporting a roughly 8% increase in recycling-material intake at its Kosaka operation in the first half of its fiscal year.
The figures are not directly comparable, given different definitions and reporting periods. They do not demonstrate a widespread shortage of e-scrap. None of the companies reviewed publicly discloses e-scrap purchasing payables.
Are refiners moving up the supply chain instead?
The more significant competitive shift is taking place earlier, in collection and preprocessing.
- Korea Zinc has assembled a US network through its PedalPoint electronics recycling businesses alongside scrap trading via Kataman, projecting the network will supply 14,000 metric tons of its 2026 copper output. A merger between PedalPoint and Solarcement — no, between PedalPoint and Solarcycle — this week bolstered that network.
- Mitsubishi Materials acquired a 19% voting stake in Elemental USA E-Waste & ITAD, with an option to reach 49% through preferred-share conversion.
- JX Advanced Metals holds a presence in Canadian electronics recycling through eCycle Solutions and has invested in Renet Japan's nationwide collection network.
- Glencore operates sampling facilities in Rhode Island and California, connecting precious-metal-bearing electronics to its Horne smelter in Quebec.
These moves give metals companies closer supplier relationships and greater control over material quality, sampling and preprocessing. For independent recyclers, firms with established downstream relationships may hold advantages in securing outlets. Whether these arrangements deliver better prices remains unclear.
How do regional structures differ?
The United States has a substantial ITAD, collection and preprocessing industry but fewer domestic outlets for complex e-scrap. Glencore's Horne facility remains a key destination for US-sourced material. Aurubis Richmond is developing another domestic option, though its ramp-up has been extended and its copper blister ships to Europe for further refining.
Europe runs a more established refining network, with major investments underway in Germany, Belgium and Spain, and new waste-shipment rules are changing how recyclables cross borders. Japan and South Korea are pursuing tighter integration between collection, preprocessing and smelting, though planned maintenance and equipment problems at Japanese facilities could constrain outlets in early 2027. China prohibits solid-waste imports but admits certain recycled copper and brass materials meeting national standards.
What decides 2027?
The most likely near-term path is gradual capacity growth, not an immediate feedstock scramble. Three indicators will test that assessment: whether new facilities begin reporting meaningful processing volumes; whether refiners cut charges or improve payable percentages; and whether companies deepen ownership of, and partnerships with, recyclers and pre-processors.
Compliance Standards will track those questions through its CS Metals Recovery Intelligence service, offering quarterly assessments, regional analysis and company scorecards. Until Aurubis and Atlantic Copper publish actual intake figures, the 2027 outlook turns on reported tonnages — and on how much of the recovered value reaches the companies collecting and preparing discarded electronics.
via resource-recycling.com (Source)
More from Rebecca Stone
Show full bio
News editor covering companies, deals and strategy in Circular economy and the environmental industry at Circular Wire.
540 articles