Recycling Industry

Wood2Wood Claims Three Routes Out of the Furnace for 20 Million Tonnes

Two years into Wood2Wood, pilot results show 100% melamine removal, 70–95% urea-formaldehyde removal and 30 kg of biocomposite produced — but every route still hinges on consistent feedstock quality.

Wood Recycling: Three routes out of the incinerator
Wood Recycling: Three routes out of the incineratorAI-generated

Waypoints

  1. Europe generates ~20 million tonnes of wood waste annually; only ~40% is recycled.

  2. Wood2Wood spans 11 countries and 26 partners, started 2024, runs until 2028 under Processes4Planet.

  3. Steam explosion removes 100% of melamine coatings and 70–95% of urea-formaldehyde adhesives.

  4. 30 kg of wood-based biocomposite produced at pilot scale; 1 m² honeycomb façade panel designed.

  5. Gasification of fibreboard delivers syngas with up to 70% hydrogen and CO2 content.

Europe generates an estimated 20 million tonnes of wood waste every year, and only around 40 per cent of it is recycled. The remainder goes to landfill or energy recovery, and the EU projects a wood shortage by 2030. Wood2Wood, a project that started in 2024, spans 11 countries and 26 partners plus representation from a non-EU country, runs until 2028 and is supported by the Processes4Planet partnership. Two years in, its first results point to three technical routes that could keep contaminated wood in the material loop.

The problem is not goodwill; it is certainty. Waste wood arrives coated, glued, painted and mixed with plastics, glass and metals. Nobody can say with confidence whether a batch contains formaldehyde-based adhesives, old preservatives or flame retardants, and supply is irregular. Faced with that, the operator has two options: invest heavily in testing and sorting, or send the material to energy recovery. Most take the safe route.

What is Wood2Wood actually building?

The project attacks the problem on four fronts:

  • Sorting: optical and spectroscopic detection, adaptive sorting systems, and human-robot collaboration supported by mixed reality.
  • Upcycling: technologies beyond chipping material into low-grade board.
  • Digital tools: an integrated circular wood upcycling platform including a Digital Product Passport (DPP) for wood-based products — a digital identity card that travels with a product and tells whoever handles it 20 years later what is actually in it.
  • Framework: the policy, market and skills work that has to be in place for any of the technology to be used.

The organising principle is cascade valorisation. "We are shifting the focus with wood waste: not whether it can be recycled, but what the highest-value use is that it can still serve — and what can be done with whatever is left after that," says project lead Akrivi Korba.

Use case 1: 3D-printed façade panels from lignin and cellulose

The first route extracts lignin and cellulose nanofibres from waste wood and combines them with poly(lactic acid), a bio-based polymer made from renewable feedstock such as corn starch or sugarcane. The wood stops being wood and becomes raw material for a biocomposite that would otherwise rely on fossil feedstock.

The best stabilised formulation retained more than 65 per cent of its tensile strength and 80 per cent of its molecular weight after prolonged UV, heat and moisture exposure. Thirty kilogrammes of biocomposite have been produced at pilot scale, and a one-square-metre honeycomb panel has been designed with mechanical properties compatible with façade and cladding applications, aimed at sound absorption. The commercial route is joint development or licensing with façade and construction-product manufacturers, with TRL6 validation, a façade test element and Life Cycle Assessment work due by project end.

The barrier is supply: variation in incoming waste carries straight through into panel performance. The value of this route depends on the quality of what arrives at the gate.

Use case 2: steam explosion takes the glue back out

The second route targets the furniture stream — particleboard and fibreboard wound through with adhesives and coated in melamine. The team fragments this material using steam explosion, working from a real waste deposit supplied by the French producer responsibility organisation Ecomaison, and skips the energy-intensive thermomechanical grinding stage entirely.

The results are a step change rather than an increment. Melamine removal is complete, at 100 per cent; current industrial processes do not separate melamine as large fragments. Urea-formaldehyde removal runs at 70 to 95 per cent: adhesive on the wood particles comes off, while resin embedded within fibres is only partially removed.

The dirty water is treated too. Formaldehyde removal reached up to 69 per cent for effluents containing adhesive-derived contaminants, and up to 96 per cent for a standard formaldehyde solution, in a three-litre bioreactor. A fungal strain tolerant to both formaldehyde and steam explosion effluents was identified — not previously reported for this application — and it preferentially grows on biomass containing adhesive residues.

Two products come out: particleboard made with decontaminated recycled fibres and a green adhesive with no VOC emissions, and mycocomposites grown on the recycled fibres that can be recycled indefinitely. The target is an industrial demonstration on a real panel line by project end, followed either by a steam explosion unit with biological effluent detoxification inside a wood panel plant or a spin-off start-up.

Use case 3: from fibreboard to personal care products

The third route travels furthest from the original material, breaking wood into chemical building blocks for personal care products, and drawing on the widest range of inputs: sewage sludge, paper and pulp sludge, industrial wood waste, fibreboard and hydrochar.

Three lines are running. Hydrothermal carbonisation delivers hydrochar yields of 50 to 75 per cent, with microwave-assisted heating cutting processing time by a factor of two to three at no cost to quality. Bubbling fluidised bed gasification of fibreboard delivers syngas with up to 70 per cent hydrogen and carbon dioxide content, keeps carbon monoxide low and produces biochar as a co-product; a water-gas shift facility now being commissioned will upgrade that syngas for fermentation into chemicals. Incineration ashes are being stabilised with microwave technology into zeolitic structures to prevent metal leaching and reduce dioxin content, with quantification under way.

The barrier here is integration. Each step works; the steps do not yet work as one continuous plant.

Three routes, one bottleneck

Read together, the use cases clear the technical obstacles one by one — melamine comes off completely, adhesives almost completely, contaminated effluents can be treated biologically, even the ash can be stabilised. What remains, in every case, is supply and scale: consistent quality at the gate and processes that run continuously in a plant as they do in a pilot.

"The technology is there, and the pilots are proving it," says Korba. "What still stands between a working process and an industrial reality is a steady, well-characterised stream of waste wood arriving at the gate — every one of our use cases points to the same challenge."

That is a waste management problem, not a research problem. The milestones to watch are the industrial particleboard demonstration, TRL6 validation of the façade panel and the final quality assessment of the personal care line — all due before the project closes in 2028.

via waste-management-world.com (Source)

Share this article:

More from Olivia Hart

Olivia Hart

Show full bio

Staff writer covering regulation, policy and their impact on Circular economy and the environmental industry at Circular Wire.

550 articles

Nearby routes

« Previous articleNext article »