Recycling Industry

Rumpke Bets $60 Million on Optical Sorting for Ohio MRF

Rumpke will invest $60 million to upgrade its St. Bernard, Ohio MRF, jumping from six to 17 optical scanners to lift recovery rates on a 500-ton-per-day stream.

Rumpke is Upgrading Ohio Recycling Center
Rumpke is Upgrading Ohio Recycling Centerbernswaelz / pixabay

Waypoints

  1. Rumpke is investing $60 million in its St. Bernard, Ohio recycling facility.

  2. The facility currently processes more than 500 tons of material daily.

  3. Optical scanner count will rise from about six to 17 under the upgrade.

  4. The overhaul adds AI-driven sorting and ballistic separation technology.

  5. Rising inbound plastic volumes are the main driver of the investment.

Rumpke Waste & Recycling will spend $60 million to overhaul its materials recovery facility in St. Bernard, Ohio, where the plant already processes more than 500 tons of material every day.

The company says the upgrade will raise throughput, improve recovery rates and open the door to new types of recyclables it cannot accept today. Recycling Region Manager Brad Dunn framed the investment plainly: "It's going to be something that's going to help improve our efficiencies, our recovery rates, reduce disposal rates, and basically just do a better job than what we're doing now."

For a facility already running at half a thousand tons daily, the project is less about new capacity and more about pulling more value out of the same inbound stream.

What changes inside the St. Bernard plant?

The core of the rebuild is the sorting line. Rumpke is replacing its disc scanners with optical scanning technology across the facility, backed by artificial intelligence for material identification and ballistic separation equipment that splits flat fibers from rigid containers.

The numbers tell the story. Dunn said the plant is going from roughly six optical scanners to 17 — nearly tripling the sensor count on the line.

"By converting this over to optical type of scanning and sorting, we'll be able to collect more of the smaller fibers and whatnot," Dunn said.

Smaller fiber capture matters because lightweight paper and cardboard pieces are exactly what older mechanical systems lose to residue. Optical units with AI recognition catch material that disc screens let fall through. The takeaway: this is a yield play, not a volume play.

Why plastics are driving the investment

Dunn was direct about what's really behind the $60 million. "What's really driving this, though, is the ability to recover more plastics. Over the years, we've seen additional plastic streams come into the facility, and we want to make sure that we're recovering as much of that as possible," he said.

That shift matters for the regional material balance. Inbound plastic volumes have grown steadily at St. Bernard, and each ton of plastic missed by the sorters is a ton sold at lower value or sent to disposal. More scanners, tuned for polymer identification, mean more of that stream ends up in bales buyers actually want.

The upgrade also positions the facility to accept new categories of recyclables — a decision that would reshape what households and commercial customers in the region can put in the bin.

What to watch next

Rumpke has not yet detailed a construction timeline or a completion date for the St. Bernard overhaul, so the open question is sequencing: how quickly the plant can shift from six scanners to 17 without interrupting daily throughput above 500 tons.

The milestone that decides the story is the moment the retooled line comes online — when the announced $60 million converts into built capacity, and the region's recovery rates and accepted-materials list start moving.

via wasteadvantagemag.com (Source)

Share this article:

More from Daniel Okafor

Daniel Okafor

Show full bio

Correspondent covering companies, deals and strategy in Circular economy and the environmental industry at Circular Wire.

528 articles

Nearby routes

« Previous articleNext article »