Industrial Decarbonization
DOE Puts $117 Million Behind Critical Minerals and Clean Steel Research
DOE spreads $117 million over 56 projects, with $2,092,583 to UNR to convert low-grade hematite into 67–70% iron DR-grade feed using AI sorting, HPGR and bio-flocculation.

Waypoints
DOE awarded $117 million across 56 projects; UNR received $2,092,583 under project EE0011821.
The UNR flowsheet targets 67–70% iron concentrates with under 2% gangue using AI optical sorting, HPGR and bio-flocculation.
The three-year project runs fiscal 2026–2029, with pilot-scale beneficiation and a DOE stage-gate in year three.
US apparent steel consumption hit an estimated 95 million metric tons in 2025 against 38 million metric tons of domestic usable iron ore.
Five university-led Topic Area 2 projects total roughly $10.1 million, from Carnegie Mellon's $1 million to Cornell's $3 million.
The U.S. Department of Energy has committed $117 million across 56 projects to modernize industrial sectors, including a $2,092,583 award to the University of Nevada, Reno for energy-efficient iron ore beneficiation aimed at clean steelmaking. The award, filed under federal project number EE0011821, was announced by DOE's Office of Critical Minerals and Energy Innovation.
The three-year initiative runs through federal fiscal years 2026 to 2029. Its full title is "Energy Efficient Comminution and Advanced Separation Technology for the Production of Direct Reduction (DR) Grade High-Quality Iron Ores." The goal is a novel beneficiation flowsheet that converts domestic low-grade hematite deposits into direct-reduction-grade ore.
Who is building what?
Mano Misra, professor of materials science and engineering, leads the project as principal investigator. Co-investigators are Pradeep Menezes, professor of mechanical engineering, and Mostafa Khodakarami, assistant professor of metallurgical engineering. The University of Utah collaborates alongside graduate and postdoctoral researchers.
UNR is one of five university-led projects under Topic Area 2, Iron and Steel: Low Grade Ore Recovery:
- University of Minnesota Duluth — $2,997,738 for induction smelting of DRI-processed low-grade ores into pig iron, with Metcovery II LLC and the National Laboratory of the Rockies.
- Cornell University — $3,000,000 for electrochemical recovery of iron oxide from mine tailings and slag, with NRRI UMD, the National Laboratory of the Rockies and Nucor.
- Michigan Technological University — $1,035,309 for microbial bioleaching of dilute waste ores, with constructed wetland partners.
- Carnegie Mellon University — $1,000,000 for process modeling and oxidation testing of electrolytic iron in electric arc furnaces, with ElectraSteel Inc.
- University of Nevada, Reno — $2,092,583 for AI optical sorting, HPGR comminution and bio-flocculation targeting 67–70% Fe hematite, with the University of Utah.
What is the technical target?
Comminution — the crushing and grinding of ore — consumes substantial electricity in mineral processing. The UNR flowsheet pairs artificial-intelligence optical sorting with high-pressure grinding rolls to achieve fracture-based size reduction while cutting power demand. Downstream beneficiation uses biotechnological flocculation and advanced flotation to remove gangue rock, producing concentrates of 67% to 70% iron with less than 2% gangue.
The market context is a feedstock mismatch. According to the U.S. Geological Survey Mineral Commodity Summaries 2026, domestic apparent consumption of steel mill products reached an estimated 95 million metric tons in 2025, while domestic mines produced 38 million metric tons of usable iron ore. Existing processing flowsheets are optimized for blast furnaces, not low-carbon direct reduction.
Why does the DR grade threshold matter?
Primary steelmaking accounts for roughly 7% to 11% of global greenhouse gas emissions, largely because blast furnaces use metallurgical coal to reduce iron oxides. The main low-carbon route pairs Direct Reduced Iron shafts with electric arc furnaces, ideally running on clean electricity and hydrogen.
There is a catch, and it is mineralogical. Direct reduction operates in the solid state without melting the ore, so every gangue mineral in the feed carries over into the sponge iron. DRI plants therefore demand feedstocks of at least 67% iron. Standard U.S. taconite and hematite ores fall below that grade naturally, which makes advanced mineral processing the gatekeeper for avoiding import dependence.
What did the participants say?
DOE Assistant Secretary of Energy Audrey Robertson framed the program in commercial and security terms: "DOE is committed to funding innovation that positions American industry at the forefront of the global marketplace. These projects will deliver affordable, market-ready solutions that strengthen America's energy security and support job creation and economic growth nationwide."
UNR College of Engineering Dean Tom Weller emphasized the regional dimension: "Nevada Engineering is committed to research that supports regional and national needs. Dr. Misra's project is an example of UNR research contributing to a key national priority."
Misra described the process directly: "The direct reduction iron process requires extremely clean and high-quality iron-bearing ores. The process utilizes several new and existing technologies to make the clean product. These steps involve AI-enabled optical sorting, fracture mechanics using high-pressure grinding rolls and size reduction to decrease the energy consumption, followed by biotechnological flocculation and advanced flotation."
He confirmed industry participation: "We are working with the steel companies to use the technology for making clean steel using direct reduction iron. Steel companies will supply the raw materials and work with UNR researchers during the project implementation."
What does administration require?
The award carries the usual federal machinery. Under the Energy Policy Act of 2005 (EPAct Section 988), applied research awards from the DOE Industrial Technologies Office typically require a 20% non-federal matching commitment, documented under 2 CFR 200.306. Sponsored programs offices must verify third-party in-kind valuations, equipment donations and unrecovered indirect costs.
Multi-party structures add obligations:
- Formal risk assessments, invoicing verification and monitoring for subawards such as the University of Utah partnership.
- Material Transfer Agreements and data protocols with steelmakers supplying raw ore, plus IP terms covering new microbial flocculants, flowsheets and process software.
- EH&S controls for pilot-scale work: dust suppression on high-pressure grinding equipment and containment for microbial cultures in wet separation tanks.
What happens next?
The schedule is staged. Year one covers optical sensor calibration, baseline hematite characterization and high-pressure roll comminution testing. Year two shifts to microbial flocculation kinetics and flotation testing at UNR and Utah. The final year runs continuous pilot-scale beneficiation on commercial ores from industry partners, targeting DR-grade hematite above 67% iron before DOE stage-gate evaluations.
The stage gate decides the follow-on. That, and whether a 67% Fe concentrate survives contact with a commercial DRI shaft.
via casrai.org (Source)
More from Olivia Hart
Show full bio
Staff writer covering regulation, policy and their impact on Circular economy and the environmental industry at Circular Wire.
558 articles