Industrial Decarbonization

MIT voxel builders target 80% embodied-carbon cut in Bhutan

MIT's reconfigurable voxel system could cut embodied carbon 80% versus standard concrete. Plywood prototypes are heading for an outdoor test at a Bhutan housing development.

Building Blocks For A Greener Skyline
Building Blocks For A Greener Skylinepaulbr75 / pixabay

Waypoints

  1. MIT estimate: voxel buildings could cut embodied carbon by roughly 80% versus standard concrete.

  2. Steel optimization: customized beam cross-sections could remove 30% to 40% without weakening buildings.

  3. Precision: MIT robots allow about 10 millimeters of error versus roughly 100-micron tolerances for most industrial robots.

  4. Cost: voxel robots cost a few hundred dollars each rather than tens of thousands.

  5. Deployment: MIT built room-scale load-bearing plywood voxels, including a small house; an outdoor test in Bhutan is planned.

By Elena Vasquez

MIT researchers estimate that buildings assembled from reconfigurable voxel blocks could cut embodied carbon emissions by roughly 80% compared with standard concrete construction. The estimate comes from Miana Smith’s work at MIT’s Center for Bits and Atoms; no completed Bhutan housing project has measured that saving.

Construction contributes more than one-third of global greenhouse gas emissions, a burden amplified when buildings use more material than they need. Miana Smith (’21, SM ’23, PhD ’26) is a recent graduate and visiting researcher in MIT’s Program in Media Arts and Sciences and a member of the Center for Bits and Atoms research team. She has spent years trying to change how structures go together.

Why do builders keep using excess material?

Engineers know how to make more efficient structural-steel frames. By customizing beam cross-sections, they could remove an estimated 30% to 40% of the steel without weakening a building.

Custom parts require one-off design and engineering and often carry impractically high manufacturing costs, while installation requires highly skilled labor on site. Uniform, oversized pieces remain cheaper to manufacture and assemble, so builders default to using more.

Digital fabrication—3D printing and robotic assembly—can decouple design complexity from production cost, but it brings a precision penalty. Extruding concrete or placing framing members across a 10-meter span often calls for a machine accurate to a few millimeters, and such machines are difficult to manufacture and expensive.

How does a voxel loosen the precision bottleneck?

Smith inverted that trade-off: instead of requiring a precise machine to place a simple material, she makes a complex material that a basic robot can assemble correctly. Her small lattice block, or voxel, snaps into other blocks and absorbs assembly errors rather than letting them accumulate.

“You can take a very imprecise assembler—in this case, a child—and have them build something that’s very precise,” Smith said, “not because a child is somehow uniquely able to build out of Lego blocks and nothing else, but because the blocks themselves have a clever mechanical design that prevents error accumulation as the structure grows.”

Her robots tolerate about 10 millimeters of error, far greater than the roughly 100-micron tolerances of most industrial robots. That looks like failure in another system, but Smith’s blocks are built to absorb it.

The robots also cost a few hundred dollars each rather than tens of thousands, letting teams run many in parallel instead of waiting on one slow machine.

Design changes can tune properties through different materials, fabrication processes and lattice densities. Smith has made voxels from plywood, bio-based plastics, aluminum and steel using one joint design. Because the system is not tied to one material, it does not have to compromise architectural ambition.

The plywood version uses Baltic birch and 3D-printed, compostable bio-based plastic. Smith describes it as a low-embodied-carbon way to make structural units with standard construction materials.

What did the lab have to solve?

The team built on lattice geometry that predated the project, but it lacked a way to automate voxel production and assembly at scale, which became Smith’s main research focus. Early units needed as many as 24 connectors, and each joint created another chance for weakness or failure that blocked robotic construction of larger structures.

Smith’s answer was to make blocks bigger and pre-attach as many internal joints as possible before a robot touched them. She described this as a structurally active error-correction feature that lets robots build large, load-bearing structures.

She also adopted a more internally connected lattice. Smith said a stretch-dominated design outperforms a bending-dominated one for weight-to-stiffness and weight-to-strength ratios.

Where did the idea come from?

Smith’s route into fabrication began when she rebuilt motorcycle engines in a high-school STEM program and worked on electrical engineering in a plasma physics lab at UCLA. As an MIT mechanical engineering undergraduate, a research position with architecture professor Larry Sass exposed her to digital fabrication for buildings.

Class 4.140, “How to Make [almost] Anything,” taught by media arts and sciences professor Neil Gershenfeld, director of the Center for Bits and Atoms and Smith’s PhD adviser, captured her with the idea of an engineering equivalent of Lego bricks.

Before switching to robots, she spent two years in another Media Lab group engineering bacteria into woven textile fibers and sending honeybees into microgravity; they survived. Smith saw living systems as distributed assembly systems, the same principle behind her robots.

What changes in Bhutan?

Smith’s team is collaborating with Druk Holding and Investments, a major Bhutan company focused on creating a sustainable economy and future, on its next housing development, Gelephu Mindfulness City. Bhutan officials sought construction methods using local materials that could be reconfigured over time, which matches the MIT system’s design.

MIT has built room-scale, load-bearing plywood demonstrations, including a small house. Her team plans an outdoor test at a similar scale. No outdoor-test date or completed building has been disclosed, so the field program remains pre-deployment.

Can the method reach concrete?

Smith’s next target is concrete formwork, using the same reconfigurable block logic to shape concrete more efficiently. Complex molds are very expensive, and Smith expects the system to reduce that cost significantly, though she has disclosed no prototype or quantified saving.

Alongside the MIT work, Smith is pursuing a startup through the Activate Fellowship, a science entrepreneurship fellowship that helps recipients commercialize research. She wants the work to have impact and believes her generation sees the climate crisis as impending doom.

Her adviser, Gershenfeld, said: “I did not originally think of her as an entrepreneur, but she is the best kind, driven by a vision of change she wants to create, rather than by a business plan.”

The MIT lab will continue after Smith moves on. A new student cohort is examining broader robot behaviors, different robot shapes and teams of machines working together to build bigger structures.

The next decision point is commercial validation: whether the planned Bhutan test and concrete-formwork work can turn the 80% estimate into a repeatable, costed building method. Until then, the figure remains a promising estimate, not a field-proven benchmark.

via azocleantech.com (Source)

Share this article:

More from Elena Vasquez

Elena Vasquez

Show full bio

Senior reporter covering technology and product news in Circular economy and the environmental industry at Circular Wire.

564 articles

Nearby routes

« Previous articleNext article »