Cleantech & Investment
Kishorn plan targets 36 floating wind foundations a year
Slipform Engineering's proposed Kishorn factory would make up to 36 concrete floating wind foundations a year, each weighing about 20,000 tons, with a Hunterston test site due to open in January 2027.

Waypoints
Kishorn's proposed Slip4Wind factory could produce up to 36 concrete foundations a year
Each floating foundation would weigh approximately 20,000 tons
The proposed foundations could support more than 500 MW of offshore wind capacity annually
Hunterston's demonstration, R&D and training facility is scheduled to open in January 2027
Slipform was one of four businesses selected for OWGP's SmartStart Manufacturing Program
By Olivia Hart
A proposed factory at Kishorn in the Scottish Highlands would produce up to 36 concrete floating offshore wind foundations a year. Each foundation would weigh about 20,000 tons, and together they could support more than 500 MW of offshore wind capacity annually. The 36-unit figure is planned capacity, not output from an operating plant.
Engineering company Slipform Engineering is behind the Slip4Wind® proposal. It has worked with the National Manufacturing Institute Scotland (NMIS) and the Offshore Wind Growth Partnership (OWGP) through a funded project. The assessment examined production capacity, costs and workforce requirements before major investment decisions.
What does the Kishorn plant plan actually include?
At that scale, transport is not a side issue. Slipform's proposed process would keep each foundation in place while a specially designed gantry system moves manufacturing equipment around it. Completed structures could transfer directly into the water, avoiding costly movement around the site.
The construction method is slipforming, which uses continuously moving molds to build large concrete structures. OWGP funded the assessment through its SmartStart Manufacturing Program, bringing Slipform and NMIS together to test the Kishorn proposal ahead of a major investment decision.
Takeaway: The Kishorn design treats heavy transport as part of production, rather than a problem for later.
What did the factory modelling establish?
NMIS engineers used computer modelling and discrete event simulation to test how the factory could operate. The work covered staffing levels and shift patterns, then identified potential bottlenecks and efficiency opportunities, including:
- More flexible working arrangements.
- Training employees to carry out different roles.
The team also developed a phased plan covering four areas:
- Infrastructure.
- Investment.
- Regulatory requirements.
- Workforce development.
The phased plan provides evidence to support future discussions with investors and offshore wind developers; it does not replace Slipform's investment decision.
Eamon Hanley, founder and managing director at Slipform Engineering, said: “Floating offshore wind presents a significant opportunity for UK manufacturing, but producing these foundations at the scale required means finding ways to make the process more efficient and commercially viable.”
“Our plans for Slip4Wind® at Kishorn are designed to reduce some of the major costs associated with traditional manufacturing methods, particularly the need to transport these enormous structures around a site before they enter the water.”
“Working with NMIS through OWGP’s SmartStart Manufacturing Program has been extremely valuable in helping us test our plans before making that investment. The modelling has given us greater confidence in what we can achieve at Kishorn, while identifying practical improvements that we can incorporate into the factory’s development.”
Takeaway: The modelling tests the production concept, not the investment decision.
What is already under way at Hunterston?
Slipform is also progressing work on a demonstration, research, development and training facility at Hunterston in North Ayrshire. Work is well underway, and the site is scheduled to open in January 2027. Unlike Kishorn, this development has a stated opening date.
At Hunterston, the company will test a smaller version of its gantry system. The site will support trials of different concrete materials and the development of skills needed for future production at Kishorn.
NMIS has also connected Slipform with Ayrshire College to explore opportunities for workforce training and multi-skilling.
Slipform was one of four businesses selected for OWGP's SmartStart Manufacturing Program. The High Value Manufacturing Catapult delivered specialist manufacturing support. The program provides technical support to help UK manufacturers develop investment-ready proposals for the offshore wind market.
NMIS is operated by the University of Strathclyde and is part of the High Value Manufacturing Catapult.
Pritty Mathew, design engineer at NMIS, said the simulation assessed whether Slipform Engineering's targets were achievable, identified efficiency gains and gave the company a clearer view of what a working Kishorn facility would require.
Takeaway: Hunterston is the nearer-term test bed for the equipment, materials and workforce behind the larger Kishorn proposal.
What decides the next step?
Teo van der Kammen, senior project manager at OWGP, added: “Slipform Engineering is a strong example of the type of manufacturing opportunity we set out to support through SmartStart.”
“Strengthening the UK’s ability to manufacture major offshore wind components will be critical as the market expands, and the work undertaken by NMIS has helped bring the company’s ambitions for Kishorn and Hunterston closer to becoming a reality.”
The next commercial milestone for Kishorn is Slipform's major investment decision. Its phased plan covers infrastructure, investment, regulatory requirements and workforce development, while future discussions with investors and offshore wind developers will test the commercial case. The announcement gives no permit deadline or construction start date.
Takeaway: The investment decision and regulatory work will decide whether 36 foundations a year becomes a factory or remains an engineering target.
via azocleantech.com (Source)
More from Olivia Hart
Show full bio
Staff writer covering regulation, policy and their impact on Circular economy and the environmental industry at Circular Wire.
532 articles